Hook Type Conveyor Roller Shot Blasting Machine Photy FTQ37 Series For Sale

Product Detail

Hook type conveyor roller shot blasting machine Photy FTQ37 series for sale




Technical parameters

Item		Hook shot blasting machine specifications
		FTQ376	FTQ378 Single hook	FTQ378 double hook	-
Max    loading capacity of single hook/kg		600	800	800	Can be designed according to the workpiece size and customer's requirements
Max    cleaning workpiece  F/mm*h/mm		600*1100	800*1500	800*1500
Hook    qty/pc		1	1	2
Impeller    head	Qty/set	2	2	2
	Blasting    qty per set/(kg/min)	120	200	200
	Power    per set/kw	7.5	11	11
Cleaning    chamber size  L*B*H/mm		1500*1500*2500	1800*1800*2800	1800*1800*2800
Total    power/kw		25	34.4	36.1




Production description

FTQ37 series hook type shot blasting machine is composed of the impeller head, shots supply system, blasting chamber, conveying system, screw conveyor, shots elevator, dust and shots separator, dust filtration system and electrical control system. The conveying device adopts circular rotary hanger hooks. When the device detects the workpieces in the set position, open shots supply system and start blasting. The workpieces on the hanger hook in the blasting chamber will slowly rotate, exposing the workpiece surface to the shots flow. The shot blasting machine ejects the steel shots onto the workpiece surface for rust cleaning and surface strengthening, after which the steel shots drop into the recycling bucket with motor drive.




Technological process

Send workpieces to the hook rack bottom on the conveying flatcar ? the hook hoists workpieces ? electric blocks carry the workpieces to the blasting area ?do shot blasting cleaning and change the speed of the hook and then pass through ? finish cleaning and return back? the workpieces enter into the blasting area ? do shot blasting cleaning and change the speed of the hook and then return back to shots loading area ? shots feeding? enter into the next procedure.




Advantages of hook shot blasting machine

? Make preparations for shot blasting cleaning

? Adopt three-dimensional dynamic simulation of mass ejection to design the layout of the blasting chamber and the impeller head

? Use the Impeller heads with high-efficiency straight blades to significantly improve the cleaning efficiency and ensure cleaning effect

? Completely closed design. Make sure the workpieces are in a relatively closed space. Ensure that the shots won't splash out of the chamber.

? Use electric hoist with the function of walking and lifting, which can lift automatically in the shots loading and feeding area. The moving speed of workpieces is adjustable in the blasting area to achieve the required quality. 

? Use double blocks to hoist workpieces and do shot blasting cleaning.

? Finish a series of procedures including shots preparing, fast operation, fast in after speed controlling, shot blasting cleaning, fast out after speed controlling and shots feeding. The shots preparing and feeding are done by using flatcars.